Controllers found: 1 ---------------------------------------------------------------------- Controller information ---------------------------------------------------------------------- Controller Status : Optimal Channel description : SAS/SATA Controller Model : Sun STK RAID INT Controller Serial Number : 01004AA0498 Physical Slot : 0 Temperature : 87 C/ 188 F (Normal) Installed memory : 256 MB Copyback : Disabled Background consistency check : Disabled Automatic Failover : Enabled Global task priority : High Defunct disk drive count : 0 Logical devices/Failed/Degraded : 1/0/0 -------------------------------------------------------- Controller Version Information -------------------------------------------------------- BIOS : 5.2-0 (16732) Firmware : 5.2-0 (16732) Driver : 1.1-5 (2461) Boot Flash : 5.2-0 (16732) -------------------------------------------------------- Controller Battery Information -------------------------------------------------------- Status : Optimal Over temperature : No Capacity remaining : 100 percent Time remaining (at current draw) : 3 days, 1 hours, 31 minutes ---------------------------------------------------------------------- Logical device information ---------------------------------------------------------------------- Logical device number 0 Logical device name : array RAID level : 5 Status of logical device : Optimal Size : 1142774 MB Stripe-unit size : 256 KB Read-cache mode : Enabled Write-cache mode : Enabled (write-back) Write-cache setting : Enabled (write-back) when protected by battery Partitioned : Yes Protected by Hot-Spare : No Bootable : Yes Failed stripes : No -------------------------------------------------------- Logical device segment information -------------------------------------------------------- Segment 0 : Present (0,0) 00095371FBP0 3SE1FBP0 Segment 1 : Present (0,1) 00095371FBNA 3SE1FBNA Segment 2 : Present (0,2) 00095371FB7Y 3SE1FB7Y Segment 3 : Present (0,3) 00100171G9TW 3SE1G9TW Segment 4 : Present (0,4) 00095371CM7E 3SE1CM7E ---------------------------------------------------------------------- Physical Device information ---------------------------------------------------------------------- Device #0 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,0 Reported Location : Enclosure 0, Slot 0 Reported ESD : 2,0 Vendor : SEAGATE Model : ST930003SSUN300G Firmware : 0868 Serial number : 00095371FBP0 3SE1FBP0 Size : 286102 MB Write Cache : Disabled (write-through) FRU : None S.M.A.R.T. : No Device #1 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,1 Reported Location : Enclosure 0, Slot 1 Reported ESD : 2,0 Vendor : SEAGATE Model : ST930003SSUN300G Firmware : 0868 Serial number : 00095371FBNA 3SE1FBNA Size : 286102 MB Write Cache : Disabled (write-through) FRU : None S.M.A.R.T. : No Device #2 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,2 Reported Location : Enclosure 0, Slot 2 Reported ESD : 2,0 Vendor : SEAGATE Model : ST930003SSUN300G Firmware : 0868 Serial number : 00095371FB7Y 3SE1FB7Y Size : 286102 MB Write Cache : Disabled (write-through) FRU : None S.M.A.R.T. : No Device #3 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,3 Reported Location : Enclosure 0, Slot 3 Reported ESD : 2,0 Vendor : SEAGATE Model : ST930003SSUN300G Firmware : 0868 Serial number : 00100171G9TW 3SE1G9TW Size : 286102 MB Write Cache : Disabled (write-through) FRU : None S.M.A.R.T. : No Device #4 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,4 Reported Location : Enclosure 1, Slot 4 Reported ESD : 2,1 Vendor : SEAGATE Model : ST930003SSUN300G Firmware : 0868 Serial number : 00095371CM7E 3SE1CM7E Size : 286102 MB Write Cache : Disabled (write-through) FRU : None S.M.A.R.T. : No Device #5 Device is an Enclosure services device Reported Channel,Device : 2,0 Enclosure ID : 0 Type : SES2 Vendor : ADAPTEC Model : Virtual SGPIO Firmware : 0001 Status of Enclosure services device Temperature : Normal Device #6 Device is an Enclosure services device Reported Channel,Device : 2,1 Enclosure ID : 1 Type : SES2 Vendor : ADAPTEC Model : Virtual SGPIO Firmware : 0001 Status of Enclosure services device Temperature : Normal Command completed successfully.